220V electric drive customized vehicle control automatic tyre killer

GENERAL DESCRIPTION

Electromechanical tyre killer is one of the most high-end vehicle access control products to prevent vehicle intrusion.

Drive unit is placed into one end of the tyre killer, it stands above the ground level and is a complete assembly with the body.

In this way, smooth transmission of motion is achieved, also minimized the effect of external factors.

To operate this device, you just need to use the remote controller to raise the spikes and it will be raised within 2 seconds for blocking vehicles in single directional driveway.

ADVANTAGES

• Electromechanical operated

• Blocking width from 2m to 6m

• Blocking height of spike from above surface level: 550mm

• Loop detector is provided for safety

• Manual operation in case of power failure

• The solid blocking spikes is 10mm thick and welded to the solid rotation axis at a distance of approx.150mm to each other

PRODUCT DISPLAY

MAIN FUNCTIONS & FEATURES

1. Firm and anti-collision. The tyre killer body and spikes are made of 10mm thickness standard Q235

    carbon steel with strong load-bearing and destructive power.The structure is firm and durable.

2. IP68 military protection standard. 

3. Speedy and Low noise.The hydraulic tyre killer is hydraulically powered through both the raise and

    lower cycles, taking much less time and lower level of noise to operate.Typical operating

    (opening /closing) time is 1-2 seconds.

4. Safe and Reliable.Single phase drive motor, or a three phase motor to allow very high frequency of

    operation. This is ideal for large car parks or busy sites. Environment protection, low power consumption

    and high reliability.

5. Flexible control method, The system support remote control and drive-by-wire typically. For remote control,

    the controller is available to work 30 meters far away from the blocker device(depends on the radio

    communication environment on site).

6. Back up solution,Support manual operate mode,the spikes can lift or fall on level place by manual when power-off.

7. Convenient maintenance. It is easy to check, test and fix the problem.

8. Functional and Manageable: Safety accessories like photocells, inductive loop detectors , beam sensor can be

    integrated to the system very easily.

9. It can be installed with other access control elements (for example bollards, road barrier, turnstiles, fire alarm system,

    traffic light) in order to achieve an access control check-point at the highest level of security.

10. Wide range of optional configurations: Can be custom designed to suit your requirements and can be built

    in an almost infinite range of thickness and length to suit any roadway or level of security.

SPECIFICATIONS

PRODUCTION PHOTO